序号 |
作者 |
论文题目 |
期刊或会议名称，发表时间 |
1 |
Yuanqi Zeng,Bo Tao,Zhouping Yin |
Molecular Dynamics Simulation of Molecular Orientation Transformation of Pentacene on a-SiO2 |
Nano/Micro Engineered and Molecular Systems (NEMS), 2014 9th IEEE International Conference on, 2014 April, 10.1109/ NEMS.2014.6908773 |
2 |
YongQing Duan , YongAn Huang, ZhouPing Yin, NingBin Bu and WenTao Dong |
Non-wrinkled highly stretchable piezoelectric devices by electrohydrodynamic direct-writing |
Nanoscale,2040-3364,2014/6 |
3 |
Ningbin Bu,YongAn Huang,Yongqing Duan,Zhouping Yin |
Process optimization of mechano-electrospinning by response surface methodology |
Journal of Nanoscience and Nanotechnology,1533-4880,2014; 14(5) |
4 |
Haichen Qin,Ningbin Bu,Wei Chen,Zhouping Yin |
An Asymmetric Hysteresis Model and Parameter Identification Method for Piezoelectric Actuator |
Mathematical Problems in Engineering,1024-123X,2014 February |
5 |
Yuanqi Zeng,Bo Tao,Zhouping Yin |
Molecular orientation transformation of pentacene on amorphous SiO2: A computational study on the initial growth stage of physical vapor deposition |
Journal of Crystal Growth,0022-0248,2014 August |
6 |
Zunxu Liu,YongAn Huang,Jiankui Chen,Zhouping Yin |
Tunable Peeling Technique and Mechanism of Thin Chip From Compliant Adhesive Tapes |
Components, Packaging and Manufacturing Technology, IEEE Transactions on,2156-3950,April 2014 |
7 |
YongAn Huang, Yongqing Duan, Yajiang Ding, Ningbin Bu, Yanqiao Pan, Nanshu Lu,Zhouping Yin |
Versatile, kinetically controlled, high precision electrohydrodynamic writing of micro/nanofibers |
Scientific reports,2045-2322,August 2014 |
8 |
Zunxu Liu,YongAn Huang,Zhouping Yin |
A general solution for the two-dimensional stress analysis of balanced and unbalanced adhesively bonded joints |
International Journal of Adhesion and Adhesives,0143-7496,2014.05.011 |
9 |
Zhengrong Wang, Hua Yang,Wenlong Li,Zhouping Yin |
Super-resolving IC Images with an Edge-preserving
Bayesian Framework |
IEEE TRANSACTIONS ON
SEMICONDUCTOR MANUFACTURING, 2014.2 |
10 |
Shaohua Zhang, Hua Yang,Zhouping Yin |
Performance Evaluation of Typical Unsupervised
Feature Learning Algorithms for Visual Object Recognition |
WCICA 11th, 2014.7 |
11 |
Zunxu Liu, YongAn Huang,Huimin Liu,Jiankui Chen, Zhouping Yin |
Reliable Peeling of Ultrathin Die with Multi-Needle Ejector |
IEEE Transactions on Components, Packaging and Manufacturing Technology, 2156-3950, 2014 Vol.4 |
12 |
Zunxu Liu, Pengpeng Tang, YongAn Huang, Zhouping Yin |
Experimental Estimation of Adhesive Fracture Energy of Compliant Adhesive Tape |
15th International Conference on Electronic Packaging Technology, August 2014 |
13 |
YongAn Huang,Yezhou Wang,Lin Xiao,Huimin Liu,Wentao Dong,Zhouping Yin |
Microfluidic serpentine antennas with designed
mechanical tunability |
Lab on a chip,1473-0197,2014 Vol.14 |
14 |
Wenlong Li, Liping Zhou, Sijie Yan |
A case study of blade inspection based on optical scanning method |
International Journal of Production Research, October 30 2014 |
15 |
Ping Jiang Wang,Xin Wang,Ling Lin,Yang Wu |
The Method and Experimental Research on Seam Tracking and Dual-Beam Laser Welding for T-type Welding Seam |
第四届机电与自动化系统国际会议,2014年 |
16 |
liu Yizhi,Peng Fangyu,Lin Sen,Yan rong, Yang Sheng |
Experimental research of workpiece temperature in orthogonal turn-milling compound machining |
Advanced Materials Research ICAMMP 2013、2014 |
17 |
Xie Chuanning, Tang Xiaoqi, Chen Jihong, Song Bao, *Jin Jian, and Zhang Hangjun |
Reliability Analysis and Accelerated Statistical Model of CNC PCB for Electrochemical Migration |
Transactions on Device and Materials Reliability、 1530-4388 |
18 |
Xie Chuanning, Tang Xiaoqi, Chen Jihong, Song Bao, *Jin Jian, and Zhang Hangjun |
Humidity Threshold Model of CNC Multilayer Printed Circuit Board for Electrochemical Migration |
Quality and Reliability Engineering International |
19 |
Xinghong Zhang, Fangyu Peng, Feng Qiu, Rong Yan, Bin Li |
Prediction of cutting force in trochoidal milling based on radial depth of cut |
3rd International Conference on Materials Science and Engineering (ICMSE 2014) |
20 |
shuai yuan,Fangyu Peng,Lin Zhou, Peifeng Yao |
Sensitivity Analysis of Tool Axis Errors in Large Mill-turn Machine Tools |
International Conference on Mechanical Structures and Smart Materials (ICMSSM 2013) |
21 |
Yong Wang,Rong Yan,Fangyu Peng and Feng Qiu |
Stability modeling and analysis of orthogonal turn-milling with variable cutting depth and cutting thickness |
3rd International Conference on Materials Science and Engineering (ICMSE 2014) |
22 |
Hongqi Liu,Lingneng Lian,Bin Li,Xinyong Mao,Shaobin Yuan,Fangyu Peng |
An approach based on singular spectrum analysis and the Mahalanobis distance for tool breakage detection |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE、0954-4062 |
23 |
Bin Li, Feng Li, Hongqi Liu, Hui Cai, Xinyong Mao and Fangyu Peng |
A measurement strategy and an error-compensation model for the on-machine laser measurement of large-scale free-form surfaces |
MEASUREMENT SCIENCE & TECHNOLOGY、0957-0233 |
24 |
Jianzhong Yang，Jinqiang Zhou，Xiumei Gong |
An offine programming system for robot-based die querching |
MATAR国际会议、2013 |
25 |
Bosheng Ye, Song Bao, zhengyi li, Xiong Shuo, Tang Xiaoqi |
A Study on the Robot Force Position Control Method for the Arbitrarily Inclined Plane Tracking |
INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS、1729-8806 |
26 |
Li Xi,Feng Danfeng |
Research on Plate Viscoelatic Waveguide Absorber |
Advanced Science Letter |
27 |
Tan Bo,Lin Bin, Liu Hongqi, Mao Xinyong,Peng Fangyu，He Songping,Yin Lin |
A thermal error modle for large machine tools that considers environmental thermal hyseeresis effects |
International Journal of machine Tools and Manufacture |
28 |
Nan Wenhu,Tang Xiaoqi,Song Bao |
An innovative motion planning for 4-DOF PKM |
ICMET 2014、 16609336 |
29 |
Wenjun Sheng,Bo Sun,Tielin Shi,Xianhua Tan, Zhengchun Peng, and Guanglan Liao |
Quantum Dot-Sensitized Hierarchical
Micro/Nanowire Architecture for
Photoelectrochemical Water Splitting |
ACS NANO, 1936-0851, 2014, 8(7):7163-7169 |
30 |
YANG Fan, SHI Tielin, YU Qiang, LIAO Guanglan |
Deformation behavior of Zr65Cu17.5Ni10Al7.5 in superplastic forming with silicon mould: Simulation and application |
Journal of Wuhan University of Technology-Materials Science Edition, 1000-2413, 2014, 29(2): 250-255 |
31 |
CHEN Biao, SHI Tielin, LIAO Guanglan |
Laser Welding of Zr41Ti14Cu12Ni10Be23 Bulk Metallic Glass and Zirconium Metal |
Journal of Wuhan University of Technology-Materials Science Edition, 1000-2413,2014, Aug, 786-788 |
32 |
Zhijing Zhu,Chuanyun Yi,Tielin Shi,Yang Gao, ChiWen, and Guanglan Liao |
Fabricating Zr-Based Bulk Metallic Glass Microcomponent by Suction Casting Using Silicon Micromold |
Advances In Mechanical Engineering,1687-8132, 2014, 362484-1-8 |
33 |
Yang Gao, Tielin Shi, Xianhua Tan, and Guanglan Liao |
A Novel Method to Fabricate Silicon Tubular Gratings with Broadband Antireflection and Super-Hydrophobicity |
Journal of Nanoscience and Nanotechnology, 1533-4880, 2014, 14(6): 4469-4474 |
34 |
Xiangning Lu, Tielin Shi, Jiguang Han, Guanglan Liao, Lei Su, Suya Wang |
Defects inspection of the solder bumps using self reference technology in active thermography |
Infrared Physics & Technology, 1350-4495, 2014, 63: 97–102 |
35 |
Xianhua Tan, Tielin Shi, Yang Gao, Wenjun Sheng, Bo Sun and Guanglan Liao |
Fabrication of micro/nanotubes by mask-based diffraction lithography |
Journal of Micromechanics and Microengineering , 0960-1317, 2014, 24(5) 055006 |
36 |
Ting Jiang, Zhengchun Peng, Wenjun Wu, Tielin Shi, Guanglan Liao |
Gas sensing using hierarchical micro/nanostructures of Morpho butterfly scales |
Sensors and Actuators A-Physical , 0924-4247, 213 (2014) 63–69 |
37 |
B. Chen, T.L. Shi, M. Li, F. Yanga, F. Yan, G.L. Liao* |
Laser welding of annealed Zr55Cu30Ni5Al10 bulk metallic glass |
Intermetallics , 0966-9795, 2014, 46: 111-117 |
38 |
Zhensong Xu, Tielin Shi, Xiangning Lu, Guanglan Liao |
Using active thermography for defects inspection of flip chip |
Microelectronics Reliability, 0026-2714, 2014, 54(4) 808–815 |
39 |
Wang, Lihui; Wang, Xi Vincent; Gao, Liang; Vancza, Jozsef |
A cloud-based approach for WEEE remanufacturing |
CIRP ANNALS-MANUFACTURING TECHNOLOGY ISSN: 0007-8506 , 2014 |
40 |
Vijayaraghavan, V.; Garg, A.; Wong, C. H.; Tai, K.; Singru, Pravin M.; Gao, Liang; Sangwan, K. S. |
A molecular dynamics based artificial intelligence approach for characterizing thermal transport in nanoscale material |
THERMOCHIMICA ACTA ISSN: 0040-6031 , OCT 20 2014 |
41 |
Zheng, Jun; Shao, Xinyu; Gao, Liang; Jiang, Ping; Qiu, Haobo |
A prior-knowledge input LSSVR metamodeling method with tuning based on cellular particle swarm optimization for engineering design |
EXPERT SYSTEMS WITH APPLICATIONS ISSN: 0957-4174,APR 2014 |
42 |
Garg, A.; Vijayaraghavan, V.; Wong, C. H.; Tai, K.; Gao, Liang |
An embedded simulation approach for modeling the thermal conductivity of 2D nanoscale material |
SIMULATION MODELLING PRACTICE AND THEORY ISSN: 1569-190X,MAY 2014 |
43 |
Pan, Quan-Ke; Sang, Hong-Yan; Duan, Jun-Hua; Gao, Liang |
An improved fruit fly optimization algorithm for continuous function optimization problems |
KNOWLEDGE-BASED SYSTEMS ISSN: 0950-7051 , MAY 2014 |
44 |
Mou, Jianhui; Li, Xinyu; Gao, Liang; Lu, Chao; Zhang, Guohui |
An Improved Genetic Algorithm for Single-Machine Inverse Scheduling Problem |
MATHEMATICAL PROBLEMS IN ENGINEERING ISSN: 1024-123X,2014 |
45 |
Garg, A.; Vijayaraghavan, V.; Wong, C. H.; Tai, K.; Sumithra, K.; Gao, L.; Singru, Pravin M. |
Combined CI-MD approach in formulation of engineering moduli of single layer graphene sheet |
SIMULATION MODELLING PRACTICE AND THEORY ISSN: 1569-190X,NOV 2014 |
46 |
Gao, Liang; Zhang, Chunjiang; Li, Xinyu; Wang, Lijian |
Discrete electromagnetism-like mechanism algorithm for assembly sequences planning |
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH ISSN: 0020-7543,JUN 18 2014 |
47 |
Wen, Xiao-yu; Li, Xin-yu; Gao, Liang; Sang, Hong-yan |
Honey bees mating optimization algorithm for process planning problem |
JOURNAL OF INTELLIGENT MANUFACTURING ISSN: 0956-5515,JUN 2014 |
48 |
Li, Hao; Gao, Liang; Li, Peigen |
Topology optimization of structures under multiple loading cases with a new compliance-volume product |
ENGINEERING OPTIMIZATION ISSN: 0305-215X,JUN 3 2014 |
49 |
Sheng, WJ; Sun, B; Shi, TL; Tan, XH; Peng, ZC; Liao, GL |
Quantum Dot-Sensitized Hierarchical Micro/Nanowire Architecture for Photoelectrochemical Water Splitting |
ACS NANO |
50 |
Dagdeviren, C; Su, YW; Joe, P; Yona, R; Liu, YH; Kim, YS; Huang, YA; Damadoran, AR; Xia, J; Martin, LW; Huang, YG; Rogers, JA |
Conformable amplified lead zirconate titanate sensors with enhanced piezoelectric response for cutaneous pressure monitoring |
NATURE COMMUNICATIONS |
51 |
Duan, YQ; Huang, YA; Yin, ZP; Bu, NB; Dong, WT |
Non-wrinkled, highly stretchable piezoelectric devices by electrohydrodynamic direct-writing |
NANOSCALE |
52 |
Chi, K; Zhang, ZY; Xi, JB; Huang, YA; Xiao, F ; Wang, S; Liu, YQ |
Freestanding Graphene Paper Supported Three-Dimensional Porous Graphene-Polyaniline Nanoconnposite Synthesized by Inkjet Printing and in Flexible All-Solid-State Supercapacitor |
ACS APPLIED MATERIALS & INTERFACES |
53 |
Huang, YA; Wang, YZ; Xiao, L; Liu, HM; Dong, WT; Yin, ZP |
Microfluidic serpentine antennas with designed mechanical tunability |
LAB ON A CHIP |
54 |
Jiang, SL; Shi, TL; Liu, D; Long, H; Xi, S; Wu, FS; Li, XP; Xia, Q ; Tang, ZR |
Integration of MnO2 thin film and carbon nanotubes to three-dimensional carbon microelectrodes for electrochemical microcapacitors |
JOURNAL OF POWER SOURCES |
55 |
Jiang, SL ; Shi, TL; Zhan, XB; Long, H ; Xi, S; Hu, H ; Tang, ZR |
High-performance all-solid-state flexible supercapacitors based on two-step activated carbon cloth |
JOURNAL OF POWER SOURCES |
56 |
Huang, YA; Duan, YQ; Ding, YJ; Bu, NB; Pan, YQ ; Lu, NS; Yin, ZP |
Versatile, kinetically controlled, high precision electrohydrodynamic writing of micro/nanofibers |
SCIENTIFIC REPORTS |
57 |
Liu, X; Chen, ZZ; Wen, YW ; Chen, R ; Shan, B |
Surface stabilities and NO oxidation kinetics on hexagonal-phase LaCoO3 facets: a first-principles study |
CATALYSIS SCIENCE & TECHNOLOGY |
58 |
Zhang, HT; Chen, ZY |
Consensus Acceleration in a Class of Predictive Networks |
IEEE TRANSACTIONS ON NEURAL NETWORKS AND LEARNING SYSTEMS |
59 |
Jiang, L; Shi, TL; Xuan, JP |
Fault diagnosis of rolling bearings based on Marginal Fisher analysis |
JOURNAL OF VIBRATION AND CONTROL |
60 |
Yang, WJ; Wen, YW; Chen, R; Zeng, DW; Shan, B |
Study of structural, electronic and optical properties of tungsten doped bismuth oxychloride by DFT calculations |
PHYSICAL CHEMISTRY CHEMICAL PHYSICS |
61 |
Zhou, C; Liu, X; Wu, CZ; Wen, YW; Xue, YJ; Chen, R; Zhang, ZL ; Shan, B; Yin, HF; Wang, WG |
NO oxidation catalysis on copper doped hexagonal phase LaCoO3: a combined experimental and theoretical study |
PHYSICAL CHEMISTRY CHEMICAL PHYSICS |
62 |
Pan, QK; Dong, Y |
An improved migrating birds optimisation for a hybrid flowshop scheduling with total flowtime minimisation |
INFORMATION SCIENCES |
63 |
Ji, JJ; Lee, KM; Guo, JJ; Zhang, SY |
Discrete Deformation Models for Real-Time Computation of Compliant Mechanisms in Two- and Three-Dimensional Space |
IEEE-ASME TRANSACTIONS ON MECHATRONICS |
64 |
Wang, DH; Lee, KM; Guo, JJ; Yang, CJ |
Adaptive Knee Joint Exoskeleton Based on Biological Geometries |
IEEE-ASME TRANSACTIONS ON MECHATRONICS |
65 |
Bai, K ; Lee, KM |
Direct Field-Feedback Control of a Ball-Joint-Like Permanent-Magnet Spherical Motor |
IEEE-ASME TRANSACTIONS ON MECHATRONICS |
66 |
Zhu, JL; Liu, SY; Chen, XG; Zhang, CW; Jiang, H |
Robust solution to the inverse problem in optical scatterometry |
OPTICS EXPRESS |
67 |
Chen, XG; Liu, SY; Zhang, CW; Jiang, H; Ma, ZC; Sun, TY ; Xu, ZM |
Accurate characterization of nanoimprinted resist patterns using Mueller matrix ellipsometry |
OPTICS EXPRESS |
68 |
Wu, XF; Liu, SY; Li, J ; Lam, EY |
Efficient source mask optimization with Zernike polynomial functions for source representation |
OPTICS EXPRESS |
69 |
Fan, MC; Chen, ZY; Zhang, HT |
Semi-Global Consensus of Nonlinear Second-Order Multi-Agent Systems With Measurement Output Feedback |
IEEE TRANSACTIONS ON AUTOMATIC CONTROL |
70 |
Pan, QK; Sang, HY; Duan, JH; Gao, L |
An improved fruit fly optimization algorithm for continuous function optimization problems |
KNOWLEDGE-BASED SYSTEMS |
71 |
Li, JQ ; Pan, QK; Mao, K; Suganthan, PN |
Solving the steelmaking casting problem using an effective fruit fly optimisation algorithm
|
KNOWLEDGE-BASED SYSTEMS |
72 |
Sun, TY; Zhao, WN; Wu, XH; Liu, SS ; Ma, ZC; Peng, J; He, J ; Xu, HF; Liu, SY; Xu, ZM |
Porous Light-Emitting Diodes With Patterned Sapphire Substrates Realized by High-Voltage Self-Growth and Soft UV Nanoimprint Processes |
JOURNAL OF LIGHTWAVE TECHNOLOGY |
73 |
Mao, XY; Luo, B; Li, B; Cai, H; Liu, HQ; Pen, FY |
An approach for measuring the FRF of machine tool structure without knowing any input force |
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE |
74 |
Zhang, GJ; Chen, Z; Zhang, Z; Huang, Y; Ming, WY; Li, H |
A macroscopic mechanical model of wire electrode deflection considering temperature increment in MS-WEDM process |
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE |
75 |
Wang, QB; Wen, YW; Chen, R; Shan, B |
A hybrid functional study of the electronic and optical properties of tetragonal PbO-type phase of ZnO under pressure |
JOURNAL OF ALLOYS AND COMPOUNDS |
76 |
Xia, Q; Wang, MY; Shi, TL |
A level set method for shape and topology optimization of both structure and support of continuum structures |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
77 |
Guo, JW; Zhang, GJ; Huang, Y; Ming, WY; Liu, M ; Huang, H |
Investigation of the removing process of cathode material in micro-EDM using an atomistic-continuum model |
APPLIED SURFACE SCIENCE |
78 |
Gao, Y; Shi, TL; Tang, ZR; Jiang, SL; Xia, Q |
Silver on nano-wrinkles as a substrate for surface-enhanced Raman scattering |
APPLIED SURFACE SCIENCE |
79 |
Zhang, GJ; Guo, JW; Ming, WY; Huang, Y; Shao, XY; Zhang, Z |
Study of the machining process of nano-electrical discharge machining based on combined atomistic-continuum modeling method |
APPLIED SURFACE SCIENCE |
80 |
Chen, ZY ; Zhang, HT; Fan, MC; Wang, D; Li, DG |
Algorithms and Experiments on Flocking of Multiagents in a Bounded Space |
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY |
81 |
Jiang, SW; Shi, S; Wang, XF |
Nanomechanics and vibration analysis of graphene sheets via a 2D plate model |
JOURNAL OF PHYSICS D-APPLIED PHYSICS |
82 |
Jiang, SL; Shi, TL; Long, H; Sun, YM; Zhou, W; Tang, ZR |
High-performance binder-free supercapacitor electrode by direct growth of cobalt-manganese composite oxide nansostructures on nickel foam |
NANOSCALE RESEARCH LETTERS |
83 |
Wen, JW; Peng, L; Nguang, SK |
Asynchronous H-alpha filtering of switched time-delay systems with network induced random occurrences |
SIGNAL PROCESSING |
84 |
Xie, FY; Wu, B ; Hu, YM ; Wang, Y; Jia, GF; Cheng, Y |
A generalized interval probability-based optimization method for training generalized hidden Markov model |
SIGNAL PROCESSING |
85 |
Liu, ZX; Huang, YA; Yin, ZP; Bennati, S; Valvo, PS |
A general solution for the two-dimensional stress analysis of balanced and unbalanced adhesively bonded joints |
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES |
86 |
Lv, YP; Chen, MX; Cai, MX; Liu, S |
A reliable Cu-Sn stack bonding technology for 3D-TSV packaging |
SEMICONDUCTOR SCIENCE AND TECHNOLOGY |
87 |
Ma, B; Gong, C; Wen, YW; Chen, R; Cho, K ; Shan, B |
Modulation of contact resistance between metal and graphene by controlling the graphene edge, contact area, and point defects: An ab initio study |
JOURNAL OF APPLIED PHYSICS |
88 |
Chen, XG; Zhang, CW; Liu, SY ; Jiang, H; Ma, ZC; Xu, ZM |
Mueller matrix ellipsometric detection of profile asymmetry in nanoimprinted grating structures |
JOURNAL OF APPLIED PHYSICS |
89 |
Chen, B; Shi, TL; Li, M; Yang, F; Yan, F; Liao, GL |
Laser welding of annealed Zr55Cu30Ni5Al10 bulk metallic glass |
INTERMETALLICS |
90 |
Vijayaraghavan, V; Garg, A; Wong, CH; Tai, K; Singru, PM; Gao, L ; Sangwan, KS |
A molecular dynamics based artificial intelligence approach for characterizing thermal transport in nanoscale material |
THERMOCHIMICA ACTA |
91 |
Li, R ; Wang, B ; Li, P |
Hamiltonian system-based benchmark bending solutions of rectangular thin plates with a corner point-supported |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES |
92 |
Fu, ZT ; Zhang, XM ; Wang, XL; Yang, WY |
Analytical modeling of chatter vibration in orthogonal cutting using a predictive force model |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES |
93 |
Jeong, SH; Hjort, K; Wu, ZG |
Tape Transfer Printing of a Liquid Metal Alloy for Stretchable RF Electronics |
SENSORS |
94 |
Li, L; Yang, SM; Han, F; Wang, LJ; Zhang, XT; Jiang, ZD ; Pan, AL |
Optical Sensor Based on a Single CdS Nanobelt |
SENSORS |
95 |
Yan, SJ ; Zhu, DH; Zhuang, KJ; Zhang, XM; Ding, H |
Modeling and analysis of coated tool temperature variation in dry milling of Inconel 718 turbine blade considering flank wear effect |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
96 |
Huang, XD; Zhang, XM; Mou, HK; Zhang, XJ; Ding, H |
The influence of cryogenic cooling on milling stability |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
97 |
Duan, X; Zhou, B ; Chen, R; Zhou, H; Wen, Y ; Shan, B |
Development of lattice inversion modified embedded atom method and its applications |
CURRENT APPLIED PHYSICS |
98 |
Xu, S; Zhang, CW; Wei, HQ ; Liu, SY |
A single-image method of aberration retrieval for imaging systems under partially coherent illumination |
JOURNAL OF OPTICS |
99 |
Zheng, J; Shao, XY; Gao, L; Jiang, P; Qiu, HB |
A prior-knowledge input LSSVR metamodeling method with tuning based on cellular particle swarm optimization for engineering design |
EXPERT SYSTEMS WITH APPLICATIONS |
100 |
Jiang, T; Peng, ZC; Wu, WJ; Shi, TL; Liao, GL |
Gas sensing using hierarchical micro/nanostructures of Morpho butterfly scales |
SENSORS AND ACTUATORS A-PHYSICAL |
101 |
Deng, C; Kang, YH |
Expanding the measuring range of MPS by n-order wave-array interference |
SENSORS AND ACTUATORS A-PHYSICAL |
102 |
Zhu, DH; Yan, SJ; Li, BZ |
Single-grit modeling and simulation of crack initiation and propagation in SiC grinding using maximum undeformed chip thickness |
COMPUTATIONAL MATERIALS SCIENCE |
103 |
Dong, ZQ; Liu, SY; Chen, XG; Zhang, CW |
Determination of an optimal measurement configuration in optical scatterometry using global sensitivity analysis |
THIN SOLID FILMS |
104 |
Gao, Y; Shi, TL; Zheng, H ; Tang, ZR; Xia, Q |
Formation of submicron buckling patterns in thin metal film on micro-scale substrate by pyrolysis of photoresist |
THIN SOLID FILMS |
105 |
Zhuang, KJ; Zhu, DH; Zhang, XM; Ding, H |
Notch wear prediction model in turning of Inconel 718 with ceramic tools considering the influence of work hardened layer |
WEAR |
106 |
Xiao, WW; Mao, KM; Zhu, M; Li, B; Lei, S; Pan, XY |
Modelling the spindle-holder taper joint in machine tools: A tapered zero-thickness finite element method |
JOURNAL OF SOUND AND VIBRATION |
107 |
Wu, WJ; Chen, XD; Shan, YH |
Analysis and experiment of a vibration isolator using a novel magnetic spring with negative stiffness |
JOURNAL OF SOUND AND VIBRATION |
108 |
Wang, BX; Guan, ZL; Li, DS; Zhang, CY; Chen, L |
Two-sided assembly line balancing with operator number and task constraints: a hybrid imperialist competitive algorithm |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
109 |
Chen, Z; Huang, Y; Zhang, Z; Li, H; Ming, WY; Zhang, GJ |
An analysis and optimization of the geometrical inaccuracy in WEDM rough corner cutting |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
110 |
Li, H; Zhu, HP; Li, PG; He, F |
Tolerance analysis of mechanical assemblies based on small displacement torsor and deviation propagation theories |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
111 |
Yin, Y; Li, Y; Zhang, CY; Lou, P; Zhou, ZD |
Design and implementation of a uniform service adapter for MG |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
112 |
Zhang, GJ; Liu, M ; Li, J; Ming, WY; Shao, XY; Huang, Y |
Multi-objective optimization for surface grinding process using a hybrid particle swarm optimization algorithm |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
113 |
Deng, C ; Xie, SQ; Wu, J ; Shao, XY |
Position error compensation of semi-closed loop servo system using support vector regression and fuzzy PID control |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
114 |
Huang, Y; Ming, WY; Li, MZ; Liu, Y ; Guo, JW; Li, J ; Shao, XY ; Wang, ST |
Parameter optimization of Nd:Yag laser scribing process on core loss of grain-oriented magnetic silicon steels |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
115 |
Qiang, L; Wu, A; Bing, C |
Variable angle compensation control of noncircular turning |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
116 |
Zhang, XJ ; Xiong, CH; Ding, Y; Huang, XD; Ding, H |
A synthetical stability method for cutting parameter optimization to assure surface location accuracy in flexible part milling
|
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
117 |
Saif, U; Guan, ZL; Liu, WQ; Wang, BX; Zhang, CY |
Multi-objective artificial bee colony algorithm for simultaneous sequencing and balancing of mixed model assembly line
|
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
118 |
Tan, XH; Shi, TL; Gao, Y; Sheng, WJ; Sun, B; Liao, GL |
Fabrication of micro/nanotubes by mask-based diffraction lithography |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING |
119 |
Jiang, SL; Shi, TL; Gao, Y; Long, H; Xi, S; Tang, ZR |
Fabrication of a 3D micro/nano dual-scale carbon array and its demonstration as the microelectrodes for supercapacitors |
JOURNAL OF MICROMECHANICS AND MICROENGINEERING |
120 |
Zhao, H ; Chang, M ; Liu, XJ ; Gabayno, JL ; Chen, HT |
Design and implementation of shape memory alloy-actuated nanotweezers for nanoassembly
|
JOURNAL OF MICROMECHANICS AND MICROENGINEERING |
121 |
Liu, Q; Zhang, CY; Zhu, KR; Rao, YQ |
Novel multi-objective resource allocation and activity scheduling for fourth party logistics |
COMPUTERS & OPERATIONS RESEARCH |
122 |
Liu, T; Li, B; Wang, ST (Wang, Shuting); Gao, L |
Eigenvalue topology optimization of structures using a parameterized level set method |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
123 |
Liu, T; Wang, ST; Li, B; Gao, L |
A level-set-based topology and shape optimization method for continuum structure under geometric constraints |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
124 |
Chen, ZZ; Qiu, HB; Gao, L; Li, XK; Li, PG |
A local adaptive sampling method for reliability-based design optimization using Kriging model |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
125 |
Zeng, YQ; Tao, B; Yin, ZP |
Molecular orientation transformation of pentacene on amorphous SiO2: A computational study on the initial growth stage of physical vapor deposition |
JOURNAL OF CRYSTAL GROWTH |
126 |
Saif, U ; Guan, ZL ; Liu, WQ ; Zhang, CY; Wang, BX
|
Pareto based artificial bee colony algorithm for multi objective single model assembly line balancing with uncertain task times |
COMPUTERS & INDUSTRIAL ENGINEERING |
127 |
Lin, QJ; Jing, WX; Yang, SM; Jiang, ZD; Wang, CY |
Agglomeration and Dendritic Growth of Cu/Ti/Si Thin Film |
JOURNAL OF NANOMATERIALS |
128 |
Wan, ZM; Wang, T; Huang, QB; Wang, JL |
Acoustic finite element model updating using acoustic frequency response function |
FINITE ELEMENTS IN ANALYSIS AND DESIGN |
129 |
Deng, C; Kang, YH; Li, EL; Zhang, Y; Cheng, J; Ge, T |
A new model of the signal generation mechanism on magnetostrictive position sensor |
MEASUREMENT |
130 |
Cheng, XG; Sun, ZJ; Wang, XY; Liu, S |
Open-loop linear differential current sensor based on dual-mode Hall effect |
MEASUREMENT |
131 |
Deng, C; Kang, YH; Li, EL; Zhang, Y; Cheng, J; Ge, T |
A new model of the signal generation mechanism on magnetostrictive position sensor |
MEASUREMENT |
132 |
Zhong, YR; Qin, YC; Huang, MF; Lu, WL; Chang, L |
Constructing a meta-model for assembly tolerance types with a description logic based approach |
COMPUTER-AIDED DESIGN |
133 |
Ming, WY; Zhang, Z; Zhang, GJ; Huang, Y; Guo, JW ; Chen, Y |
Multi-Objective Optimization of 3D-Surface Topography of Machining YG15 in WEDM |
MATERIALS AND MANUFACTURING PROCESSES |
134 |
Lu, XN; Shi, TL ; Han, JG; Liao, GL; Su, L; Wang, SY |
Defects inspection of the solder bumps using self reference technology in active thermography |
INFRARED PHYSICS & TECHNOLOGY |
135 |
Zhou, XJ; Zhang, CW; Jiang, H ; Wei, HQ; Liu, SY |
Efficient representation of mask transmittance functions for vectorial lithography simulations |
JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION |
136 |
Wu, XF; Liu, SY ; Lv, W; Lam, EY |
Robust and efficient inverse mask synthesis with basis function representation |
JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION |
137 |
Lv, W; Liu, SY ; Wu, XF ; Lam, EY |
Illumination source optimization in optical lithography via derivative-free optimization |
JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION |
138 |
Xie, ZP; Zhang, CY; Shao, XY; Lin, WW; Zhu, HP |
An effective hybrid teaching-learning-based optimization algorithm for permutation flow shop scheduling problem |
ADVANCES IN ENGINEERING SOFTWARE |
139 |
Shen, YP; Chen, XD; Jiang, W; Luo, X |
Spatial force-based non-prismatic beam element for static and dynamic analyses of circular flexure hinges in compliant mechanisms |
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY |
140 |
Chen, XD; Luo, ZL; He, XM ; Zhu, LL |
Thinning and weighting of planar arrays by modified teaching-learning-based optimization algorithm |
JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS |
141 |
Deng, C ; Kang, YH; Ye, B; Wang, Z; Zhao, XF; Huang, FY |
Characterization and control of the magnetic diffusion effect in a magnetostrictive position sensor |
MEASUREMENT SCIENCE & TECHNOLOGY |
142 |
Zhang, ZY; Cheng, XG; Leng, Y ; Cao, G; Liu, S |
Silicon strain gages bonded on stainless steel using glass frit for strain sensor applications |
MEASUREMENT SCIENCE & TECHNOLOGY |
143 |
Li, B; Li, F; Liu, HQ; Cai, H; Mao, XY; Peng, FY |
A measurement strategy and an error-compensation model for the on-machine laser measurement of large-scale free-form surfaces |
MEASUREMENT SCIENCE & TECHNOLOGY |
144 |
Gao, Y; Shi, TL; Tan, XH; Liao, GL |
A Novel Method to Fabricate Silicon Tubular Gratings with Broadband Antireflection and Super-Hydrophobicity |
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY |
145 |
Bu, NB ; Huang, YA; Duan, YQ; Yin, ZP |
Process Optimization of Mechano-Electrospinning by Response Surface Methodology |
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY |
146 |
Li, L ; Yang, SM ; Zhang, XT ; Wang, LJ ; Jiang, ZD; Lin, QJ ; Wang, CY ; Han, F ; Peng, NC |
Single CdS nanowire photodetector fabricated by FIB
|
MICROELECTRONIC ENGINEERING |
147 |
Gao, L; Zhang, CJ; Li, XY; Wang, LJ |
Discrete electromagnetism-like mechanism algorithm for assembly sequences planning |
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH |
148 |
Wang, CJ; Guan, ZL ; Shao, XY; Ullah, S |
Simulation-based optimisation of logistics distribution system for an assembly line with path constraints |
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH |
149 |
Liu, ZX; Huang, YA; Liu, HM; Chen, JK; Yin, ZP |
Reliable Peeling of Ultrathin Die With Multineedle Ejector |
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY |
150 |
Liu, ZX ; Huang, YA; Chen, JK; Yin, ZP |
Tunable Peeling Technique and Mechanism of Thin Chip from Compliant Adhesive Tapes |
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY |
151 |
Liu, Q; Wang, WX; Zhu, KR; Zhang, CY; Rao, YQ |
Advanced scatter search approach and its application in a sequencing problem of mixed-model assembly lines in a case company |
ENGINEERING OPTIMIZATION |
152 |
Li, H ; Gao, L; Li, PG |
Topology optimization of structures under multiple loading cases with a new compliance-volume product |
ENGINEERING OPTIMIZATION |
153 |
Xu, ZS; Shi, TL; Lu, XN; Liao, GL |
Using active thermography for defects inspection of flip chip |
MICROELECTRONICS RELIABILITY |
154 |
Zhang, YH; Yang, WY |
A comparative study of the stochastic simulation methods applied in structural health monitoring |
ENGINEERING COMPUTATIONS |
155 |
Lv, W; Lam, EY; Wei, HQ; Liu, SY |
Cascadic multigrid algorithm for robust inverse mask synthesis in optical lithography |
JOURNAL OF MICRO-NANOLITHOGRAPHY MEMS AND MOEMS |
156 |
Long, H; Shi, TEL; Xi, S; Wu, FS ; Xia, Q; Li, XP; Tang, ZR |
Growth of nano-wrinkles on photoresist-derived carbon microelectrode array |
INTERNATIONAL JOURNAL OF NANOTECHNOLOGY |
157 |
Wen, XY; Li, XY; Gao, L; Sang, HY |
Honey bees mating optimization algorithm for process planning problem |
JOURNAL OF INTELLIGENT MANUFACTURING |
158 |
Cheng, XG; Li, FA; Zhang, ZY; Liu, S |
Design, optimization, and measurement of closed-loop Hall effect current sensor |
SCIENCE CHINA-TECHNOLOGICAL SCIENCES |
159 |
Xiong, YL; Xiong, T; Wang, YH |
Algebraic test of relative form closure grasps with its implementation |
SCIENCE CHINA-TECHNOLOGICAL SCIENCES |
160 |
Mou, JH; Li, XY; Gao, L; Lu, C; Zhang, GH |
An Improved Genetic Algorithm for Single-Machine Inverse Scheduling Problem |
MATHEMATICAL PROBLEMS IN ENGINEERING |
161 |
Qin, HC; Bu, NB; Chen, W; Yin, ZP |
An Asymmetric Hysteresis Model and Parameter Identification Method for Piezoelectric Actuator |
MATHEMATICAL PROBLEMS IN ENGINEERING |
162 |
Lu, WL; Zhang, GP; Liu, XJ; Zhou, LP; Chen, LZ; Jiang, XQ |
Prediction of Surface Topography at the End of Sliding Running-In Wear Based on Areal Surface Parameters |
TRIBOLOGY TRANSACTIONS |
163 |
Garg, A; Vijayaraghavan, V; Wong, CH; Tai, K; Sumithra, K ; Gao, L ; Singru, PM |
Combined CI-MD approach in formulation of engineering moduli of single layer graphene sheet |
SIMULATION MODELLING PRACTICE AND THEORY |
164 |
Garg, A; Vijayaraghavan, V ; Wong, CH; Tai, K; Gao, L |
An embedded simulation approach for modeling the thermal conductivity of 2D nanoscale material |
SIMULATION MODELLING PRACTICE AND THEORY |
165 |
Chen, ZY; Zhang, HT; Zhang, XM ; Ding, H |
Adaptive Active Chatter Control in Milling Processes |
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME |
166 |
Chen, Y; Lee, KM; Lin, CY; Fu, X |
Lumped-Parameter Modeling of an Immersion Flow Field for Analyzing Meniscus Dynamic Behavior |
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL TRANSACTIONS OF THE ASME |
167 |
Cheng, XG; Zhang, ZY; Li, F; Liu, S |
Hall-Effect Closed-Loop Current Sensor Based on an Optimized Magnetic Core Structure |
JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE |
168 |
Wang, ZR; Yang, H; Li, WL; Yin, ZP |
Super-Resolving IC Images with an Edge-Preserving Bayesian Framework |
IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING |
169 |
Tang, SM ; Zhang, X; Tu, DW |
Fuzzy decoding in color-coded structured light |
OPTICAL ENGINEERING |
170 |
Chen, XG; Liu, SY; Zhang, CW; Wu, YP; Ma, ZC; Sun, TY; Xu, ZM |
Accurate measurement of templates and imprinted grating structures using Mueller matrix ellipsometry |
ACTA PHYSICA SINICA |
171 |
Ma, ZC; Xu, ZM ; Peng, J; Sun, TY; Chen, XG; Zhao, WN; Liu, SS ; Wu, XH; Zou, C; Liu, SY |
Nondestructive detection of nano grating by Sepctroscopic ellipsometer |
ACTA PHYSICA SINICA |
172 |
Zhou, RG; Zhou, YF; Liu, GD; Lu, JY; Cheng, X |
Analysis of the eddy force disturbance on foil-wound coils in magnetic levitated planar motion |
INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS |
173 |
Wen, JW; Peng, L; Nguang, SK |
Finite-time H-infinity control for discrete-time Markovian jump systems subject to average dwell time |
TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL |
174 |
Luo, SD; Huang, QB |
Resonance Variation of Double-Layer Structure Composed of Porous Material and Air Layer Based on Biot Theory |
ACTA ACUSTICA UNITED WITH ACUSTICA |
175 |
Qi, DZ; Rao, YQ |
An integrated approach on cut planning and nesting for metal structures manufacturing |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE |
176 |
Li, ZL ; Li, XQ; Chen, XD |
Generic vibration criteria-based dual-chamber pneumatic spring vibration isolation table design
|
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE |
177 |
Mao, HB; Huang, QB; Wang, JL; Zhu, M |
An analysis of shock isolation characteristics of a head of a woodpecker and its application to a bionic helmet |
JOURNAL OF VIBROENGINEERING |
178 |
Zhu, M; Mao, KM; Li, B; Xiao, WW |
An analytical method to select spindle speed variation parameters for chatter suppression in NC machining |
JOURNAL OF VIBROENGINEERING |
179 |
Xiao, WW ; Mao, KM; Li, B ; Lei, S |
Contact stiffness of bolted joint with different material combination in machine tools |
JOURNAL OF VIBROENGINEERING |
180 |
Liu, HQ ; Lian, LN ; Li, B; Mao, XY; Yuan, SB ; Peng, FY |
An approach based on singular spectrum analysis and the Mahalanobis distance for tool breakage detection |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE |
181 |
Li, Y; Zhang, T ; Deng, L; Wang, B |
Acquisition technology research of EEG and related physiological signals under +Gz acceleration |
IRISH JOURNAL OF MEDICAL SCIENCE |
182 |
Zhou, RG; Liu, GD; Zhou, YF; Tu, X; Yan, SJ |
Design of Precise Synchrone Mechanism in Multiaxial Laser Measurement |
ADVANCES IN MECHANICAL ENGINEERING |
183 |
Zhu, ZJ; Yi, CY; Shi, TL; Gao, Y; Wen, C ; Liao, GL |
Fabricating Zr-Based Bulk Metallic Glass Microcomponent by Suction Casting Using Silicon Micromold |
ADVANCES IN MECHANICAL ENGINEERING |
184 |
Yang, F; Shi, TL; Yu, Q; Liao, GL |
Deformation behavior of Zr65Cu17.5Ni10Al7.5 in superplastic forming with silicon mould: Simulation and application |
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION |
185 |
Li, HQ ; Li, B; Mao, KM; Huang, XL; Peng, FY |
A Parameterized Model of Bolted Joints in Machine Tools |
INTERNATIONAL JOURNAL OF ACOUSTICS AND VIBRATION |
186 |
Zhu, DH ; Li, BZ ; Ding, H |
A combined model with optimal solution for prediction of grinding temperature |
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY |
187 |
Tu, J ; Kang, YH ; Liu, YY |
A New Magnetic Configuration for a Fast Electromagnetic Acoustic Transducer Applied to Online Steel Pipe Wall Thickness Measurements
|
MATERIALS EVALUATION |
188 |
Long, H; Shi, TL; Jiang, SL; Xi, S; Chen, R; Liu, SY ; Liao, GL ; Tang, ZR |
Synthesis of a nanowire self-assembled hierarchical ZnCo2O4 shell/Ni current collector core as binder-free anodes for high-performance Li-ion batteries |
JOURNAL OF MATERIALS CHEMISTRY A |
189 |
Yin, Y; Zhang, CY ; Li, Y
|
A two-stage data fusion model for wireless sensor networks |
INTERNATIONAL JOURNAL OF SENSOR NETWORKS |
190 |
Yang, WJ ; Wen, YW ; Zeng, DW ; Wang, QB; Chen, R ; Wang, WC; Shan, B |
Interfacial charge transfer and enhanced photocatalytic performance for the heterojunction WO3/BiOCl: first-principles study |
JOURNAL OF MATERIALS CHEMISTRY A |
学院微信公众号